User guide

SECTION 3 CONFIGURATION
3-8 SECTION 3, CONFIGURATION
Field Description
Passphrase Enter the Passphrase to be used for Key
encryption. This is the Passphrase used by
other Access Points (AP), so you must enter
the same phrase for all of the Motorola client
devices on your wireless LAN. The Passphrase
must be between 8 and 63 characters.
Passphrase
Confirmation
Enter the Passphrase again.
Key Input Method Available if Shared Key in ESS Auth Mode is
selected. The options are:
! Passphrase
! Hexadecimal
! ASCII
If you select either Passphrase or
Hexadecimal, the format of the Key appears in
a hexadecimal format. The Passphrase is
determined by the password entered in the
Passphrase filed.
If you are using other non-Motorola wireless
products with Shared Key (PSK) enabled, you
may need to enter your WEP keys manually (in
Hexadecimal format) for the non-Motorola
wireless products.
Select the option that best matches your needs.
The default is Passphrase.
Key Length This is only available when ESS Auth Mode is
set to Pre-Shared Key (PSK) and the
Encryption Status is set to None. The option
selected determines the strength of the key.
There are two options:
! 128-bit
! 64-bit
Select the option that best matches your needs.