Specifications

INTERFACE-RADIO COMMANDS 23 - 3
23.1 interface-radio Instance
Table 23.1 summarizes interface radio configuration commands.
Table 23.1 interface-radio config commands
Commands Description Reference
aeroscout Enables Aeroscout Multicast packet forwarding page 23-5
aggregation Configures 802.11n aggregation parameters page 23-6
airtime-fairness Enables fair access for clients based on airtime usage page 23-9
antenna-diversity Transmits antenna diversity for non-11n transmit rates page 23-10
antenna-gain Specifies the antenna gain of the selected radio page 23-11
antenna-mode Configures the radio antenna mode page 23-12
beacon Configures beacon parameters page 23-13
channel Configures a radio’s channel of operation page 23-15
data-rates Specifies the 802.11 rates supported on a radio page 23-16
description Defines a radio’s description page 23-19
dfs-rehome Reverts to configured home channel once Dynamic Frequency Selection
(DFS) evacuation period expires
page 23-20
dynamic-chain-
selection
Enables automatic antenna mode selection page 23-21
ekahau Enables Ekahau multicast packet forwarding page 23-22
guard-interval Configures the 802.11n guard interval page 23-23
lock-rf-mode Retains user configured radio RF mode settings page 23-24
max-clients Defines the maximum number of wireless clients allowed to associate page 23-25
mesh Configures radio mesh parameters page 23-26
no Negates a command or sets its default page 23-27
non-unicast Configures the handling of non unicast frames page 23-30
off-channel-scan Enables radio off channel scanning page 23-32
placement Configures the location where a radio is deployed page 23-34
power Configures the radio transmit power page 23-35
preamble-short Configures user short preambles on the radio page 23-36
probe-response Configures transmission parameters for probe response frames page 23-37
radio-share-mode Configures the mode of operation, for this radio, as radio-share page 23-38
rf-mode Configures a radio RF mode page 23-39