Specifications

23 - 12 WiNG 5.2.6 Wireless Controller CLI Reference Guide
23.1.6 antenna-mode
 interface-radio Instance
Configures the antenna mode (the number of transmit and receive antennas) on the radio
Supported in the following platforms:
• Wireless Controller — RFS4011
Syntax
antenna-mode [1*1|1*3|2*2|default]
Parameters
• antenna-mode [1*1|1*3|2*2|default]
Examples
RFS4000-880DA7(config-profile-default_RFS4000-if-radio1)#antenna-mode 2x2
RFS4000-880DA7(config-profile-default_RFS4000-if-radio1)#show context
interface radio1
antenna-gain 12.0
aggregation ampdu tx-only
aeroscout mac 11-22-33-44-55-66
antenna-mode 2x2
antenna-diversity
airtime-fairness prefer-ht weight 6
RFS4000-880DA7(config-profile-default_RFS4000-if-radio1)#
Related Commands
1*1 Uses antenna A to receive and transmit
1*3 Uses antenna A to transmit and receives on other antennas
2*2 Uses antenna A and C for both transmit and receive
default Uses default antenna settings
no Resets the radio antenna mode (the number of transmit and receive antennas) to its
default