Specifications

23 - 40 WiNG 5.2.6 Wireless Controller CLI Reference Guide
23.1.27 rifs
 interface-radio Instance
Configures Reduced Interframe Spacing (RIFS) parameters on this radio
Supported in the following platforms:
• Wireless Controller — RFS4011
Syntax
rifs [none|rx-only|tx-only|tx-rx]
Parameters
• rifs [none|rx-only|tx-only|tx-rx]
Examples
RFS4000-880DA7(config-profile-default_RFS4000-if-radio1)#rifs tx-only
RFS4000-880DA7(config-profile-default_RFS4000-if-radio1)#show context
interface radio1
rf-mode sensor
placement outdoor
mesh preferred-peer 2 11-22-33-44-55-66
beacon period 50
off-channel-scan channel-list 2.4GHz 1
aggregation ampdu tx-only
rifs tx-only
aeroscout mac 11-22-33-44-55-66
non-unicast tx-rate bss 1 dynamic-all
non-unicast tx-rate bss 2 highest-basic
non-unicast tx-rate bss 3 highest-basic
non-unicast tx-rate bss 4 highest-basic
non-unicast tx-rate bss 5 highest-basic
non-unicast tx-rate bss 6 highest-basic
--More--
Related Commands
rifs Configures RIFS parameters
none Disables support for RIFS
rx-only Supports RIFS possession only
tx-only Supports RIFS transmission only
tx-rx Supports both RIFS transmission and possession
no Disables radio RIFS parameters