Specifications

3 - 20 WiNG 5.2.6 Wireless Controller CLI Reference Guide
3.1.10 connect
 privileged exec config mode commands
Begins a console connection to a remote device using the remote device’s MiNT ID or name
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
connect [mint-id <MINT-ID>|<REMOTE-DEVICE-NAME>]
Parameters
• connect [mint-id <MINT-ID>|<REMOTE-DEVICE-NAME>]
Examples
rfs7000-37FABE#connect RFDOMAIN_UseCase1/RFS7000-37FAAA
Entering character mode
Escape character is '^]'.
RFS7000 release 5.2.6.0-013D
rfs7000-37FABE login: admin
Password:
Welcome to CLI
RFS7000-37FAAA>
rfs6000-380649#show mint lsp-db
1 LSPs in LSP-db of 70.38.06.49:
LSP 70.38.06.49 at level 1, hostname "rfs6000-380649", 0 adjacencies, seqnum 3824
rfs6000-380649#
rfs7000-37FABE>connect mint-id 01.44.54.C0
Entering character mode
Escape character is '^]'.
AP650 release 5.2.6.0-026D
AP650-4454C0 login:
mint-id <MINT-ID> Connects to a remote system using the MiNT ID
• <MINT-ID> – Specify the remote device MiNT ID.
<REMOTE-DEVICE-NAME> Connects to a remote system using its name
• <REMOTE-DEVICE-NAME> – Specify the remote device name.