Specifications

PRIVILEGED EXEC MODE COMMANDS 3 - 67
3.1.42 upgrade
 privileged exec config mode commands
Upgrades software image on a device
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
upgrade [<FILE>|<URL>]
Parameters
• upgrade [<FILE>|<URL>]
Examples
rfs7000-37FABE#upgrade tftp://157.235.208.105:/img
var2 is 10 percent full
/tmp is 2 percent full
Free Memory 161896 kB
FWU invoked via Linux shell
Running from partition /dev/hda5, partition to
rfs7000-37FABE#upgrade tftp://157.125.208.235/img
Running from partition /dev/mtdblock7, partition to update is /dev/mtdblock6
Related Commands
<URL> Specify the target firmware image location in the following format:
tftp://<hostname|IP>[:port]/path/file
ftp://<user>:<passwd>@<hostname|IP>[:port]/path/file
sftp://<user>:<passwd>@<hostname|IP>[:port]>/path/file
http://<hostname|IP>[:port]/path/file
cf:/path/file
usb<n>:/path/file
background Performs upgrade in the background
on <DEVICE-NAME> Optional. Upgrades the software image on a remote AP or wireless controller
• <DEVICE-NAME> – Specify the name of the AP or wireless controller.
no Removes a patch installed on a specified device