Specifications

GLOBAL CONFIGURATION COMMANDS 4 - 45
4.1.17.2.2 no
 critical-resource-policy-mode-commands
Removes a device from the critical resource list. This command also resets the ping interval to its default.
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
no monitor [<IP>|ping-interval]
Parameters
• no monitor [<IP>|ping-interval]
Examples
Following is the critical resource policy ‘test’ settings before the ‘no’ is executed:
rfs7000-37FABE(config-critical-resource-policy-test)#show context
critical-resource-policy test
monitor 172.16.10.2 ping-mode arp-only vlan 1
monitor 172.16.10.1 ping-mode arp-icmp
monitor ping-interval 10
rfs7000-37FABE(config-critical-resource-policy-test)#
Following is the critical resource policy ‘test’ settings after the ‘no’ is executed:
rfs7000-37FABE(config-critical-resource-policy-test)#no monitor 172.16.10.2
rfs7000-37FABE(config-critical-resource-policy-test)#show context
critical-resource-policy test
monitor 172.16.10.1 ping-mode arp-icmp
monitor ping-interval 10
rfs7000-37FABE(config-critical-resource-policy-test)#
Related Commands
monitor Configures critical resource monitoring parameters
<IP> Removes a specified device from the list of monitored devices
ping-interval Resets the ping interval for pinging critical resources
monitor Adds a device to the critical resource policy list