Specifications

4 - 130 WiNG 5.2.6 Wireless Controller CLI Reference Guide
4.1.40.2.6 layout
 rf-domain-mode-commands
Configures the RF Domain layout in terms of area, floor, and location on a map. It allows users to place APs across the
deployment map. A maximum of 256 layouts is permitted.
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
layout [area|floor|map-location]
layout [area|floor|map-location] {area <AREA-NAME>|floor <FLOOR-NAME>|
map-location [<URL> units [feet|meters] {area <AREA-NAME>|floor <FLOOR-NAME>}}
Parameters
• layout [area|floor|map-location] {area <AREA-NAME>|floor <FLOOR-NAME>|
map-location [<URL> units [feet|meters] {area <AREA-NAME>|floor <FLOOR-NAME>}}
Examples
rfs7000-37FABE(config-rf-domain-default)#layout map-location www.firstfloor.com
units meters area Ecospace floor Floor5
rfs7000-37FABE(config-rf-domain-default)#show context
rf-domain default
country-code us
sensor-server 1 ip 172.16.10.14 port 1
channel-list dynamic
channel-list 2.4GHz 1,2,3,4,5,6,7,8,9,10
layout map-location www.firstfloor.com units meters area Ecospace floor Floor5
rfs7000-37FABE(config-rf-domain-default)#
Related Commands
layout Configures the RF Domain layout in terms of area, floor, and location on a map
area <AREA-NAME> Configures the RF Domain area name
• <AREA-NAME> – Specify the area name.
floor <FLOOR-NAME> Configures the RF Domain floor name
• <FLOOR-NAME> – Specify the floor name.
map-location <URL> units
[feet|meters]
Configures the location of the RF Domain on the map
• <URL> – Specify the URL to configure the map location.
• units – Configures the map units in terms of feet or meters
• feet – Selects the unit of measurement as feet
• meters – Selects the unit of measurement as meters
no Removes the RF Domain layout details