Specifications

GLOBAL CONFIGURATION COMMANDS 4 - 163
4.1.49.2.11 client-load-balancing
 wlan-mode-commands
Configures client load balancing on a WLAN
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
client-load-balancing {allow-single-band-clients|band-discovery-intvl|
capability-ageout-time|max-probe-req|probe-req-invl}
client-load-balancing {allow-single-band-clients [2.4Ghz|5Ghz]|
band-discovery-intvl [<0-10000>]|capability-ageout-time [<0-10000>]}
client-load-balancing {{max-probe-req|probe-req-intvl} [2.4Ghz|5Ghz] [<0-10000>]}
Parameters
• client-load-balancing {allow-single-band-clients [2.4Ghz|5Ghz]|
band-discovery-intvl [<0-10000>]|capability-ageout-time [<0-10000>]}
• client-load-balancing {{max-probe-req|probe-req-intvl} [2.4Ghz|5Ghz]
[<0-10000>]}
client-load-balancing Configures client load balancing on a WLAN
allow-single-band-
clients [2.4GHz|5GHz]
Optional. Allows single band clients to associate even during load balancing
• 2.4GHz – Enables load balancing across 2.4GHz channels
• 5GHz – Enables load balancing across 5GHz channels
band-discovery-intvl
<0-10000>
Optional. Configures time interval to discover a client's band capability before associating it
• <0-10000> – Specify a value from 0 - 10000 seconds.
capability-ageout-time
<0-10000>
Optional. Configures a client's capability ageout interval
• <0-10000> – Specify a value from 0 - 10000 seconds.
client-load-balancing Configures load balancing of clients on a WLAN
max-probe-req
[2.4GHz|5GHz] <0-
10000>
Optional. Configures client probe request interval limits for association
• 2.4GHz – Configures maximum client probe requests on 2.4GHz radios
• 5GHz – Configures maximum client probe requests on 5GHz radios
• <0-10000> – Specify a client probe request threshold from 0 - 100000.
probe-req-intvl
2.4GHz|5GHz] <0-10000>
Optional. Configures client probe request interval limits for association
• 2.4GHz – Configures client probe request interval on 2.4GHz radios
• 5GHz – Configures client probe request interval on 5GHz radios
• <0-10000> – Specify a value from 0 - 100000.