Specifications

4 - 188 WiNG 5.2.6 Wireless Controller CLI Reference Guide
4.1.49.2.30 vlan-pool-member
 wlan-mode-commands
Adds a member VLAN to a WLAN’s VLAN pool
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
vlan-pool-member <WORD> {limit <0-8192>}
Parameters
• vlan-pool-member <WORD> {limit <0-8192>}
Examples
rfs7000-37FABE(config-wlan-wlan1)#vlan-pool-member 1-10 limit 1
rfs7000-37FABE(config-wlan-wlan1)#show context
wlan wlan1
ssid test1
vlan-pool-member 1 limit 1
vlan-pool-member 2 limit 1
vlan-pool-member 3 limit 1
vlan-pool-member 4 limit 1
vlan-pool-member 5 limit 1
vlan-pool-member 6 limit 1
vlan-pool-member 7 limit 1
vlan-pool-member 8 limit 1
vlan-pool-member 9 limit 1
vlan-pool-member 10 limit 1
bridging-mode local
encryption-type none
authentication-type none
802.11w sa-query timeout 110
802.11w sa-query attempts 1
radius vlan-assignment
motorola-extensions wmm-load-information
client-load-balancing probe-req-intvl 5ghz 5
client-load-balancing band-discovery-intvl 2
use ip-access-list in symbol
proxy-arp-mode strict
rfs7000-37FABE(config-wlan-wlan1)#
NOTE: The creation of a VLAN pool overrides the VLAN’s configuration.
vlan-pool-member Adds a member VLAN to a WLAN’s VLAN pool
<WORD> Defines the VLAN configuration. It is either a single index, or a list of VLAN IDs (For
example, 1,3,7)
limit <0-8192> Optional. Is ignored if the number of clients are limited and well within the limits of the
DHCP pool on the VLAN
• <0-8192> – Specifies the number of users allowed