Specifications

5 - 18 WiNG 5.2.6 Wireless Controller CLI Reference Guide
• service advanced-wips terminate-device <MAC>
• service ap300 dot1x username <USERNAME> password <PASSWORD> on [all|ap-mac <MAC>]
• service ap300 dns-name <DNS> on [all|ap-mac <MAC>]
• service ap300 [locator|reload] <MAC>
• service clear ap-upgrade history {on <DOMAIN-NAME>}
advanced-wips terminate-
device <MAC>
The advanced WIPS service command clears event history details, and terminates a
device.
• terminate-device – Terminates a specified device
• <MAC> – Specify the MAC address of the AP or wireless client.
ap300 Sets global AP300 configuration parameters
dot1x Sets 802.1x authentication parameters
username <USERNAME> Authenticates user before providing access
• <USERNAME> – Specify the username.
password <PASSWORD> Authenticates password before providing access
• <PASSWORD> – Specify the password.
on [all|
ap-mac <MAC>]
Sets global AP300 parameters on a specified AP300 or all AP300s
• all – Sets global parameters on all AP300s
• AP300 <MAC> – Sets global parameters on a specified AP300
• <MAC> – Specify the MAC address of the AP300.
ap300 Sets global AP300 configuration parameters
dns-name <DNS> Authenticates DNS server name
• <DNS> – Specify the DNS sever name.
on [all|ap-mac <MAC>] Adopts a specified AP300 or al AP300s
• all – Adopts all AP300s
• AP300 <MAC> – Adopts a specified AP300
• <MAC> – Specify the MAC address of the AP300.
ap300 Sets global AP300 configuration parameters
locator Enables AP300 LEDs
reload Resets an AP300
<MAC> Provides the MAC address of the AP300
• <MAC> – Specify the MAC address of the AP300.
clear ap-upgrade history Clears firmware upgrade history
on <DOMAIN-NAME> Optional. Clears firmware upgrade details in a specified RF Domain
• <DOMAIN-NAME> – Specify the RF Domain name.