Specifications

5 - 22 WiNG 5.2.6 Wireless Controller CLI Reference Guide
• service radius test [<IP>|<HOSTNAME>] <PORT> <1024-65535> <WORD> <USERNAME>
<PASSWORD> {wlan <WLAN> ssid <SSID>} {(on <DEVICE-NAME>)}
• service set validation-mode [full|partial] {on <DEVICE-NAME>}
• service show advanced-wips stats [ap-table|client-table|connected-sensors-status|
termination-entries]
<PASSWORD> Specify the password.
wlan <WLAN>
ssid <SSID>
Tests the local RADIUS WLAN. Specify the local RADIUS WLAN name.
• ssid <SSID> – Specify the local RADIUS server’s SSID.
on <DEVICE-NAME> Optional. Performs the tests on a specified device
• <DEVICE-NAME> – Specify the name of the AP or wireless controller.
radius test Tests a RADIUS server account
• test – Tests the RADIUS server account with user parameters
[<IP>|<HOSTNAME>] Sets the IP address or hostname of the RADIUS server
• <IP> – Specify the RADIUS server’s IP address.
• <HOSTNAME> – Specify the RADIUS server’s hostname.
<PORT> <1024-65535> Specify the RADIUS server port from 1024 - 65535. The default port is 1812.
<WORD> Specify the shared secret to logon to the RADIUS server.
<USERNAME> Specify the name of the user for authentication.
<PASSWORD> Specify the password.
wlan <WLAN>
ssid <SSID>
Tests the RADIUS server on the local WLAN. Specify the local WLAN name.
• ssid <SSID> – Specify the RADIUS server’s SSID.
on <DEVICE-NAME> Optional. Performs the tests on a specified device
• <DEVICE-NAME> – Specify the name of the AP or wireless controller.
set Sets the validation mode for running configuration validation
validation-mode
[full|partial]
Sets the validation mode
• full – Performs a full configuration validation
• partial – Performs a partial configuration validation
on <DEVICE-NAME> Optional. Performs configuration validation on a specified device
• <DEVICE-NAME> – Specify the name of the AP or wireless controller.
show Displays running system statistics based on the parameters passed
advanced-wips stats Displays advanced WIPS statistics
ap-table Displays AP table statistics
client-table Displays client table statistics