Specifications

6 - 8 WiNG 5.2.6 Wireless Controller CLI Reference Guide
6.1.2 adoption
show commands
The adoption command is common to all three modes. It displays information related to APs adopted by a wireless
controller.
Supported in the following platforms:
Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
show adoption [config-errors|history|info|offline|pending|status]
show adoption [config-errors <DEVICE-NAME>|history {on <DEVICE-NAME>}|
info {on <DEVICE-NAME>}|offline|pending {on <DEVICE-NAME>}|
status {on <DEVICE-NAME>}]
Parameters
• show adoption [config-errors <DEVICE-NAME>|history {on <DEVICE-NAME>}|info {on
<DEVICE-NAME>}|offline|pending {on <DEVICE-NAME>}|status {on-<DEVICE-NAME>}]
Examples
rfs6000-380649(config)#show adoption offline
--------------------------------------------------------------------------------
MAC HOST-NAME TYPE RF-DOMAIN TIME
OFFLINE
--------------------------------------------------------------------------------
00-23-68-31-16-B5 ap650-3116B5 ap650 default
unknown
00-15-70-63-4F-86 ap300-634F86 ap300 (un-mapped)
unknown
00-A0-F8-CF-1E-DA ap300-CF1EDA ap300 (un-mapped)
unknown
--------------------------------------------------------------------------------
rfs6000-380649(config)#
adoption Displays an AP adoption history and status. It also displays adopted device configuration
errors.
config-errors
<DEVICE-NAME>
Displays configuration errors of an AP or all APs adopted by a wireless controller
<DEVICE-NAME> – Specify the name of the AP or wireless controller.
history
{on <DEVICE-NAME>}
Displays adoption history status
on <DEVICE-NAME> – Optional. Displays adoption history status on a specified device
<DEVICE-NAME> – Specify the name of the AP or wireless controller.
info
{on <DEVICE-NAME>}
Displays adopted device details
on <DEVICE-NAME> – Optional. Displays adoption details on a specified device
<DEVICE-NAME> – Specify the name of the AP or wireless controller.
offline Displays device’s non-adopted status and its adopted access points
pending
{on <DEVICE-NAME>}
Displays details for access points pending adoption, but have to actually connect to wireless
controller
on <DEVICE-NAME> – Optional. Displays information on a specified device
<DEVICE-NAME> – Specify the name of the AP or wireless controller.
status
{on <DEVICE-NAME>}
Displays a device’s adoption status
on <DEVICE-NAME> – Optional. Specify the name of the AP or wireless controller.