Specifications

6 - 18 WiNG 5.2.6 Wireless Controller CLI Reference Guide
6.1.9 cluster
 show commands
Displays cluster information (cluster configuration parameters, members, status etc.)
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
show [configuration|members|status]
show cluster [configuration|members {detail}|status]
Parameters
• show cluster [configuration|members {detail}|status]
Examples
rfs6000-380649(config)#show cluster configuration
Cluster Configuration Information
Name : test
Configured Mode : Active
Master Priority : 128
Force configured state : Disabled
Force configured state delay : 5 minutes
Handle STP : Disabled
rfs6000-380649(config)#show cl
clock cluster
rfs6000-380649(config)#
rfs6000-380649(config)#show cluster members detail
------------------------------------------------------------------------------------
---------------------
ID MAC MODE AP COUNT AAP COUNT AP LICENSE AAP LICENSE
VERSION
------------------------------------------------------------------------------------
---------------------
70.38.06.49 00-15-70-38-06-49 Active 0 0 0 0
5.2.6.0-032B
------------------------------------------------------------------------------------
---------------------
rfs6000-380649(config)#
cluster Displays cluster information
configuration Displays cluster configuration parameters
members {detail} Displays cluster members configured on the logged device
• detail – Optional. Displays detailed information of known cluster members
status Displays cluster status