Specifications

6 - 20 WiNG 5.2.6 Wireless Controller CLI Reference Guide
6.1.11 context
 show commands
Displays the current context details
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
show context {include-factory|session-config}
show context {include-factory|session-config {include-factory}}
Parameters
• show context {include-factory|session-config {include-factory}}
Examples
rfs6000-380649(config)#show context include-factory
!
! Configuration of RFS6000 version 5.2.6.0-013D
!
!
version 2.1
!
!
ip access-list BROADCAST-MULTICAST-CONTROL
permit tcp any any rule-precedence 10 rule-description "permit all TCP traffic"
permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description "permit DHCP
replies"
deny udp any range 137 138 any range 137 138 rule-precedence 20 rule-description "deny
windows netbios"
deny ip any 224.0.0.0/4 rule-precedence 21 rule-description "deny IP multicast"
deny ip any host 255.255.255.255 rule-precedence 22 rule-description "deny IP local
broadcast"
permit ip any any rule-precedence 100 rule-description "permit all IP traffic"
!
mac access-list PERMIT-ARP-AND-IPv4
permit any any type ip rule-precedence 10 rule-description "permit all IPv4 traffic"
--More--
rfs6000-380649(config)#
include-factory Optional. Includes factory defaults
session-config
include-factory
Optional. Displays running system information in the current context
• include-factory – Optional. Includes factory defaults