Specifications

6 - 26 WiNG 5.2.6 Wireless Controller CLI Reference Guide
6.1.15 debugging
 show commands
Displays debugging information
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
show debugging {advanced-wips|captive-portal|cfgd|dhcpsvr|mint|mstp|nsm|on|
radius|snmp|ssm|voice|vpn|wireless}
show debugging {advanced-wips|cfgd}
show debugging {captive-portal|mint|mstp|nsm|voice|wireless}
{on <DEVICE-OR-DOMAIN-NAME>}
show debugging {on <DEVICE-OR-DOMAIN-NAME>}
show debugging {dhcpsvr|radius|snmp|ssm|vpn} {on <DEVICE-NAME>}
Parameters
• show debugging {advanced-wips|cfgd}
• show debugging {captive-portal|mint|mstp|nsm|voice|wireless} {on <DEVICE-OR-DOMAIN-
NAME>}
debugging
{advanced-wips|cfgd}
Displays debugging processes in progress based on the parameters passed
• advanced-wips – Optional. Displays the advanced WIPS module’s debugging
configuration
• cfgd – Optional. Displays the cfgd process debugging configuration
debugging
{captive-portal|
mint|mstp|nsm|voice|
wireless}
Displays debugging processes in progress based on the parameters passed
• captive-portal – Optional. Displays the hotspot (HSD) module’s debugging configuration
• mint – Optional. Displays the MiNT module’s debugging configuration
• mstp – Optional. Displays the Multiple Spanning Tree (MST) module’s debugging
configuration
• nsm – Optional. Displays Network Service Module (NSM) debugging configuration
• voice – Optional. Displays the voice module’s debugging configuration
• wireless – Optional. Displays the wireless module’s debugging configuration
on <DEVICE-OR-DOMAIN-
NAME>
The following are common to all of the above options:
• on <DEVICE-OR-DOMAIN-NAME> – Optional. Displays debugging processes on a
device or RF Domain.
• <DEVICE-OR-DOMAIN-NAME> – The name of the AP, wireless controller, or
RF Domain.