Specifications

6 - 36 WiNG 5.2.6 Wireless Controller CLI Reference Guide
6.1.21 interface
 show commands
Displays wireless controller interface status
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
show interfaces {<INTERFACE>|brief|counters|ge <1-8>|me1|on|
port-channel <1-4>|switchport|up1|vlan <1-4094>|wwan1} {on <DEVICE-NAME>}
Parameters
• show interfaces {<INTERFACE>|brief|counters|ge <1-8>|me1|on|
port-cahnnel <1-4>|switchport|up1|vlan <1-4094>|wwan1} {on <DEVICE-NAME>}
interfaces Displays wireless controller interface status based on the parameters passed
<INTERFACE>
{on <DEVICE-NAME>}
Displays status of the interface specified by the <INTERFACE> parameter. Specify the
interface name.
• on <DEVICE-NAME> – Optional. Displays interface status on a specified device
• <DEVICE-NAME> – Specify the name of the AP or wireless controller.
brief
{on <DEVICE-NAME>}
Displays a brief summary of the interface status and configuration
• on <DEVICE-NAME> – Optional. Displays a brief summary on a specified device
• <DEVICE-NAME> – Specify the name of the AP or wireless controller.
counters
{on <DEVICE-NAME>}
Displays interface Tx or Rx counters
• on <DEVICE-NAME> – Optional. Displays interface Tx or Rx counters on a specified
device
• <DEVICE-NAME> – Specify the name of the AP or wireless controller.
ge <1-8> Displays Gigabit Ethernet interface status and configuration
• <1-8> – Select the Gigabit Ethernet interface index from 1 - 8
me1
{on <DEVICE-NAME>}
Displays FastEthernet interface status and configuration
• on <DEVICE-NAME> – Optional. Displays Fast Ethernet interface status on a specified
device
• <DEVICE-NAME> – Specify the name of the AP or wireless controller.
on <DEVICE-NAME> Displays interface status on a specified device
• <DEVICE-NAME> – Specify the name of the AP or wireless controller.
port-channel <1-4> Displays port channel interface status and configuration
• <1-4> – Specify the port channel index from 1 - 4.
switch port
{on <DEVICE-NAME>}
Displays layer 2 interface status
• on <DEVICE-NAME> – Optional. Displays interface status on a specified device
• <DEVICE-NAME> – Specify the name of the AP or wireless controller.
up1 Displays WAN Ethernet interface status