Specifications

PROFILES 7 - 9
7.1.3 ap-upgrade
 config-profile config commands
Enables an automatic firmware upgrade on an adopted access point
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
ap-upgrade [auto|count]
ap-upgrade auto {(ap621|ap622|ap650|ap6511|ap6521|ap6532|ap71xx|ap81xx)}
ap-upgrade count <1-20>
Parameters
• ap-upgrade auto {(ap621|ap622|ap650|ap6511|ap6521|ap6532|ap71xx|ap81xx)}
• ap-upgrade count <1-20>
Examples
rfs6000-380649(config-profile-default-RFS6000)#ap-upgrade count 7
rfs6000-380649(config-profile-default-RFS6000)#show context
profile RFS6000 default-RFS6000
autoinstall configuration
autoinstall firmware
ap-upgrade count 7
crypto isakmp policy default
crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
aaa vpn-authentication secondary 172.16.10.1 key 0 motorola2012 authport 1025
--More--
Related Commands
auto Enables automatic firmware upgrade on an adopted AP
ap621 Optional. Enables automatic AP621 firmware upgrade
ap622 Optional. Enables automatic AP622 firmware upgrade
ap650 Optional. Enables automatic AP650 firmware upgrade
ap6511 Optional. Enables automatic AP6511 firmware upgrade
ap6521 Optional. Enables automatic AP6521 firmware upgrade
ap6532 Optional. Enables automatic AP6532 firmware upgrade
ap71xx Optional. Enables automatic AP71XX firmware upgrade
ap81xx Optional. Enables automatic AP81XX firmware upgrade
count <1-20> Sets a limit to the number of concurrent upgrades performed
• <1-20> – Specify a value from 1 - 20.
no Disables or reverts settings to their default