Specifications

2 - 8 WiNG 5.2.6 Wireless Controller CLI Reference Guide
2.1.2 change-passwd
 user exec mode commands
Changes the password of a logged user. When this command is executed without any parameters, the password can be
changed interactively.
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
change-passwd {<OLD-PASSWORD>} <NEW-PASSWORD>
Parameters
• change passwd {<OLD-PASSWORD>} <NEW-PASSWORD>
Usage Guidelines
A password must be from 1 - 64 characters.
Examples
rfs7000-37FABE#change-passwd
Enter old password:
Enter new password:
Password for user 'admin' changed successfully
Please write this password change to memory(write memory) to be persistent.
rfs7000-37FABE#write memory
OK
rfs7000-37FABE#
<OLD-PASSWORD>
<NEW-PASSWORD>
Optional. The password can also be changed interactively. To do so, press [Enter] after
the command.
• <OLD-PASSWORD> – Optional. Specify the password that needs to be changed
• <NEW-PASSWORD> – Specify the password to change to