Specifications

7 - 16 WiNG 5.2.6 Wireless Controller CLI Reference Guide
7.1.8.2 bridge-vlan-mode-commands
 bridge
Table 7.3 summarizes bridge VLAN mode commands
Table 7.3 bridge-vlan mode commands
Command Description Reference
bridging-mode Configures how packets on this VLAN are bridged page 7-17
description Defines VLAN description page 7-18
edge-vlan Enables edge VLAN mode page 7-19
ip Configures IP components page 7-58
no Negates a command or sets its default values page 7-22
stateful-packet-
inspection-12
Enables stateful packet inspection in the layer 2 firewall page 7-25
use Uses pre configured access lists with this PF bridge policy page 7-26
clrscr Clears the display screen page 5-3
commit Commits (saves) changes made in the current session page 5-4
do Runs commands from EXEC mode page 4-67
end Ends and exits the current mode and moves to the PRIV EXEC mode page 5-5
exit Ends the current mode and moves to the previous mode page 5-6
help Displays interactive help system page 5-7
revert Reverts changes to their last saved configuration page 5-13
service Invokes service commands to troubleshoot or debug
(config-if)
instance configurations
page 5-14
show Displays running system information page 6-4
write Writes information to memory or terminal page 5-40