Specifications

7 - 30 WiNG 5.2.6 Wireless Controller CLI Reference Guide
7.1.11 configuration-persistence
 config-profile config commands
Enables configuration persistence across reloads
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
configuration-persistence {secure}
Parameters
• configuration-persistence {secure}
Examples
rfs7000-37FABE(config-profile-default-RFS7000)#configuration-persistence secure
rfs7000-37FABE(config-profile-default-RFS7000)#show context
profile RFS7000 default-RFS7000
bridge vlan 1
no edge-vlan
ip igmp snooping
no ip igmp snooping unknown-multicast-fwd
--More--
cluster name cluster1
cluster member ip 1.2.3.4 level 2
cluster member ip 172.16.10.3
cluster member vlan 4094
cluster handle-stp
cluster force-configured-state
cluster force-configured-state-delay 3
holdtime 1000
timer 900
configuration-persistence secure
rfs7000-37FABE(config-profile-default-RFS7000)#
Related Commands
secure Optional. Ensures parts of a file that contain security information are not written during a
reload
no Disables or reverts settings to their default