Specifications

PROFILES 7 - 111
7.1.21.4.8channel
 interface radio instance
Configures a radio’s channel of operation
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
channel [smart|acs|1|2|3|4|-------]
Parameters
• channel [smart|acs|1|2|3|4|-------]
Examples
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#channel 1
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#show context
interface radio1
channel 1
beacon period 50
beacon dtim-period bss 1 2
beacon dtim-period bss 2 20
beacon dtim-period bss 3 2
beacon dtim-period bss 4 2
beacon dtim-period bss 5 2
beacon dtim-period bss 6 2
beacon dtim-period bss 7 2
beacon dtim-period bss 8 2
antenna-gain 12.0
aggregation ampdu tx-only
aeroscout forward
antenna-mode 2x2
antenna-diversity
airtime-fairness prefer-ht weight 6
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#
Related Commands
smart|acs|1|2|3|4|-------] Configures a radio’s channel of operation. The options are:
• smart – Uses Smart RF to assign a channel (uses uniform spectrum spreading if Smart
RF is not enabled)
•acs – Use Automatic Channel Selection (ACS) to assign a channel
• 1 – Channel 1 in 20Mhz
• 2 – Channel 1 in 20Mhz
no Resets a radio’s channel of operation