Specifications

7 - 116 WiNG 5.2.6 Wireless Controller CLI Reference Guide
7.1.21.4.12dynamic-chain-selection
 interface radio instance
Enables automatic antenna mode selection (single antenna for non-11n transmit rates)
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
dynamic-chain-selection
Parameters
None
Examples
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#dynamic-chain-selection
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#
Related Commands
no Use the configured transmit antenna mode for all clients