Specifications

7 - 132 WiNG 5.2.6 Wireless Controller CLI Reference Guide
7.1.21.4.24probe-response
 interface radio instance
Configures transmission parameters for probe response frames
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
probe-response [rate|retry]
probe-response rate [follow-probe-request|highest-basic|lowest-basic]
Parameters
• probe-response retry
• probe-response rate [follow-probe-request|highest-basic|lowest-basic]
Examples
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#probe-response rate
follow-probe-request
rfs7000-37FABE(config-profile-71xxTestProfile-if-radio1)#
Related Commands
probe-response Configures transmission parameters for probe response frames
retry Retransmits probe response if no acknowledgement is received from the client
probe-response Configures transmission parameters for probe response frames
rate Configures the data rates at which the probe responses are transmitted
follow-probe-request Transmits probe responses at the same rate the request was received
highest-basic Uses the highest configured basic rate
lowest-basic Uses the lowest configured basic rate
no Resets transmission parameters for probe response frames