Specifications

7 - 160 WiNG 5.2.6 Wireless Controller CLI Reference Guide
• mint link listen ip <IP> {adjacency-hold-time <2-600>|cost <1-10000>|
hello-interval <1-120>|level [1|2]}
• mint link ip <IP> {<1-65535>|adjacency-hold-time <2-600>|cost <1-10000>|
hello-interval <1-120>|level [1|2]}
<1-65535> level 2 Specifies the peer UDP port to link with the specified IP address
• level – Specifies the routing level
• 2 – Configures inter-site MiNT routing level
adjacent-hold-time
<2-600>
Optional. Specifies the adjacency lifetime after hello packets cease
• <2-600> – Specify a value from 2 - 600 seconds.
cost <1-100000> Optional. Specifies the link cost in arbitrary units
• <1-100000> – Specify a value from 1 - 100000.
hello-interval <1-120> Optional. Specifies the hello-interval between packets
• <1-120> – Specify a value from 1 - 120.
link listen Creates a MiNT routing link
• listen – Creates a MiNT listening link
ip <IP> Creates a MiNT listening link over UDP/IP
• <IP> – Specify the IP address of the listening port.
adjacent-hold-time
<2-600>
Optional. Specifies adjacency lifetime after hello packets cease
• <2-600> – Specify a value from 2 - 600 seconds.
cost <1-100000> Optional. Specifies link cost in arbitrary units
• <1-100000> – Specify a value from 1 - 100000.
hello-interval <1-120> Optional. Specifies the interval between hello packets
• <1-120> – Specify a value from 1 - 120.
level [1|2] Optional. Specifies the routing levels for this routing link. The options are:
• 1 – Configures local routing
• 2 – Configures inter-site routing
link ip <IP> Creates a MiNT routing link
• ip – Creates a MiNT tunnel over UDP/IP
• <IP> – Specify the IP address of the peer.
<1-65535> Select the peer UDP port from 1 - 65535.
adjacent-hold-time
<2-600>
Optional. Specifies the adjacency lifetime after hello packets cease
• <2-600> – Specify a value from 2 - 600 seconds.
cost <1-100000> Optional. Specifies the link cost in arbitrary units
• <1-100000> – Specify a value from 1 - 100000.