Specifications

PROFILES 7 - 161
• mint mlcp [IP|vlan]
• mint spf-latency <0-60>
Examples
rfs7000-37FABE(config-profile-default-RFS7000)#mint level 1 area-id 88
rfs7000-37FABE(config-profile-default-RFS7000)#
rfs7000-37FABEconfig-profile-default-RFS7000)#mint link ip 1.2.3.4 level 1
rfs7000-37FABE(config-profile-default-RFS7000)#
rfs7000-37FABE(config-profile-default-RFS7000)#show mint links
vlan-1 : level 1, cost 10, 1 adjacencies, DIS 70.37.fa.be (self)
rfs7000-37FABE(config-profile-default-RFS7000)#show mint stats
1 L1 neighbors
L1 LSP DB size 2 LSPs (1 KB)
2 L1 routes
Last SPFs took 0s
SPF (re)calculated 6 times.
levels 1
base priority 180
dis priority 180
rfs7000-37FABE(config-profile-default-RFS7000)#
rfs6000-380649(config-profile-default-RFS6000)#show mint route
Destination : Next-Hop(s)
70.38.06.49 : 70.38.06.49 via self
rfs6000-380649(config-profile-default-RFS6000)#
Related Commands
hello-interval <1-120> Optional. Specifies the hello interval between packets
<1-120> – Specify a value from 1 - 120.
level [1|2] Optional. Specifies the routing levels for this routing link. The options are:
• 1 – Configures local routing
• 2 – Configures inter-site routing
mlcp [l2|l3] Configures the MiNT Link Creation Protocol (MLCP)
• l2 – Configures MLCP over layer 2 (VLAN) links
• l3 – Configures MLCP over layer 3 (IP) links
spf-latency <0-60> Specifies the latency of SPF routing recalculation
• <0-60> – Specify the latency from 0 - 60 seconds.
no Disables or reverts settings to their default