Specifications

PROFILES 7 - 187
device
led Turn LEDs on/off on the device
legacy-auto-downgrade Enable device firmware to auto downgrade
when other legacy devices are detected
legacy-auto-update Auto upgrade of legacy devices
license License management command
lldp Link Layer Discovery Protocol
load-balancing Configure load balancing parameter
local Local user authentication database for
VPN
location Configure the location
logging Modify message logging facilities
mac-address-table MAC Address Table
mac-name Configure MAC address to name mappings
memory-profile Memory profile to be used on the device
min-misconfiguration-recovery-time Check controller connectivity after
configuration is received
mint MiNT protocol
misconfiguration-recovery-time Check controller connectivity after
configuration is received
monitor Critical resource monitoring
neighbor-inactivity-timeout Configure neighbor inactivity timeout
neighbor-info-interval Configure neighbor information exchange
interval
no Negate a command or set its defaults
noc Configure the noc related setting
ntp Ntp server A.B.C.D
override-wlan Configure RF Domain level overrides for
wlan
power-config Configure power mode
preferred-controller-group Controller group this system will prefer
for adoption
radius Configure device-level radius
authentication parameters
remove-override Remove configuration item override from
the device (so profile value takes
effect)
rf-domain-manager RF Domain Manager
rsa-key Assign a RSA key to a service
sensor-server Motorola AirDefense sensor server
configuration
spanning-tree Spanning tree
stats Configure the stats related setting
timezone Configure the timezone
trustpoint Assign a trustpoint to a service
use Set setting to use
vpn Vpn configuration
wep-shared-key-auth Enable support for 802.11 WEP shared key
authentication
clrscr Clears the display screen
commit Commit all changes made in this session
do Run commands from Exec mode
end End current mode and change to EXEC mode
exit End current mode and down to previous
mode
help Description of the interactive help
system
revert Revert changes
service Service Commands
show Show running system information
write Write running configuration to memory or
terminal
rfs7000-37FABE(config-device-00-15-70-88-9E-C4)#