Specifications

13 - 16 WiNG 5.2.6 Wireless Controller CLI Reference Guide
13.1.3.2.4 default-router
 dhcp-pool-mode
Configures a default router or gateway IP address for the network pool
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
default-router <IP> {<IP1>}
Parameters
• default-router <IP> {<IP1>}
Usage Guidelines
The IP address of the router should be on the same subnet as the client subnet.
Examples
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#default-router 172.16.10.8
172.16.10.9
rfs7000-37FABE(config-dhcp-policy-test-pool-pool1)#
Related Commands
<IP> Configures the primary router for this network
<IP1> Optional. Configures the secondary router for this network. If the primary router is not
available, this router is used.
no Resets values or disables the DHCP pool default router commands