Specifications

MINT-POLICY 15 - 5
15.1.3 udp
 mint-policy
Configures MiNT UDP/IP encapsulation parameters. Use this command to configure the default UDP port used for MiNT
control packet encapsulation.
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
udp port <2-65534>
Parameters
• udp port <2-65534>
Examples
rfs7000-37FABE(config-mint-policy-global-default)#udp port 1024
rfs7000-37FABE(config-mint-policy-global-default)#show context
mint-policy global-default
udp port 1024
mtu 996
level 2 area-id 2000
rfs7000-37FABE(config-mint-policy-global-default)#
Related Commands
port <2-65534> Configures default UDP port used for MiNT control packet encapsulation
• <2-65534> – Enter a value from 2 - 65534. The specified value becomes the default
UDP port. The value must be an even number, since data packets use the control port
+1.
no Reverts MiNT UDP/IP encapsulation to its default