Specifications

PRIVILEGED EXEC MODE COMMANDS 3 - 5
3.1.1 ap-upgrade
 privileged exec config mode commands
Enables an automatic firmware upgrade on an adopted AP or a set of APs. APs of the same type can be upgraded together.
Once APs have been upgraded, they can be forced to reboot. This command also loads the firmware on to the wireless
controller.
The AP upgrade command also upgrades APs in a specified RF Domain.
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
ap-upgrade [<MAC/HOSTNAME>|all|ap621|ap622|ap650|ap6511|ap6521|ap6532|
ap71XX|ap81XX|cancel-upgrade|load-image|rf-domain]
ap-upgrade [<MAC/HOSTNAME>|all] {no-reboot|reboot-time <TIME>|
upgrade-time <TIME> {no-reboot|reboot-time <TIME>}}
ap-upgrade [ap621|ap622|ap650|ap6511|ap6521|ap6532|ap71XX|ap81XX] all
{no-reboot|reboot-time <TIME>|upgrade-time <TIME> {no-reboot|
reboot-time <TIME>}}]
ap-upgrade cancel-upgrade [<MAC/HOSTNAME>|all|ap621|ap622|ap650|ap6511|
ap6521|ap6532|71xx|ap81XX|on]
ap-upgrade cancel-upgrade [<MAC/HOSTNAME>|all]
ap-upgrade cancel-upgrade [ap621|ap622|ap650|ap6511|ap6521|ap6532|ap71XX|ap81XX] all
ap-upgrade cancel-upgrade on rf-domain [<RF-DOMAIN-NAME>|all]
ap-upgrade load-image [ap621|ap622|ap650|ap6511|ap6521|ap6532|ap71XX|ap81XX]
<IMAGE-URL>
ap-upgrade rf-domain [<RF-DOMAIN-NAME>|all] [all|ap621|ap622|ap650|ap6511|
ap6521|ap6532|ap71XX|ap81XX] {no-reboot|no-via-rf-domain|reboot-time <TIME>|
upgrade-time <TIME> {no-reboot|reboot-time <TIME>}}
ap-upgrade rf-domain [<RF-DOMAIN-NAME>|all] [all|ap621|ap622|ap650|ap6511|
ap6521|ap6532|ap71XX|ap81XX] {no-via-rf-domain} {no-reboot|reboot-time <TIME>|
upgrade-time <TIME>}
Parameters
• ap-upgrade [<MAC/HOSTNAME>|all] {no-reboot|reboot-time <TIME>|upgrade-time <TIME>
{no-reboot|reboot-time <TIME>}}
[<MAC/HOSTNAME>|all] Upgrades firmware on a specified AP or all APs adopted by the wireless controller
• <MAC/HOSTNAME> – Specify the MAC address or hostname of the AP.
• all – Upgrades all APs adopted by the wireless controller
no-reboot Optional. Disables automatic reboot after a successful upgrade (the wireless controller
must be manually restarted)
reboot-time <TIME> Optional. Schedules an automatic reboot after a successful upgrade
• <TIME> – Specify the reboot time in the MM/DD/YYYY-HH:MM or HH:MM format.