Specifications

20 - 8 WiNG 5.2.6 Wireless Controller CLI Reference Guide
20.1.5 enable
 smart-rf-policy
Enables a Smart RF policy
Use this command to enable this Smart RF policy. Once enabled, the policy can be assigned to a RF Domain or used for
wireless controller network support.
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
enable
Parameters
None
Examples
rfs7000-37FABE(config-smart-rf-policy-test)#enable
rfs7000-37FABE(config-smart-rf-policy-test)#
Related Commands
no Disables a Smart RF policy