Specifications

20 - 12 WiNG 5.2.6 Wireless Controller CLI Reference Guide
20.1.8 neighbor-recovery
 smart-rf-policy
Enables recovery from errors due to faulty neighbor radios. Enabling neighbor recovery ensures automatic recovery when
a radio fails within the radio coverage area. Smart RF instructs neighboring access points to increase their transmit power
to compensate for the failed radio.
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
neighbor-recovery {dynamic-sampling|power-hold-time|power-threshold}
neighbor-recovery {dynamic-sampling {retries [<1-10>]|threshold [<1-30>]}}
neighbor-recovery {power-hold-time [<0-3600>]}
neighbor-recovery {power-threshold [2.4Ghz|5Ghz] [<-85--55>]}
Parameters
• neighbor-recovery {dynamic-sampling {retries [<1-10>]|threshold
[<1-30>]}}
• neighbor-recovery {power-hold-time [<0-3600>]}
• neighbor-recovery {power-threshold [2.4Ghz|5Ghz] [<-85--55>]}
dynamic-sampling Optional. Configures dynamic sampling on this Smart RF policy
retries <1-10> Optional. Specifies the number of retries before allowing a power change
• <1-10> – Sets the number of retries from 1 - 10
threshold <1-30> Optional. Specifies the minimum number of sample reports before which a power change
requires dynamic sampling
• <1-30> – Sets the minimum number of reports from 1 - 30
power-hold-time Optional. Specifies the minimum time between two power change recoveries
<0-3600> Sets the time from 0 - 3600 seconds
power-threshold Optional. Specifies the power threshold based on the recovery performed
[2.4GHz|5GHz] Selects the band
• 2.4GHz – Selects the 2.4GHz band
• 5GHz – Selects the 5GHz band
<-85--55> Specify the threshold value
• <-85--55> – Sets the power threshold from -85 - -55 dBm