Specifications

21 - 12 WiNG 5.2.6 Wireless Controller CLI Reference Guide
Usage Guidelines
The no command negates any command associated with it. Wherever required, use the same parameters associated with
the command getting negated.
Examples
rfs7000-37FABE(config-wips-policy-test)#show context
wips-policy test
history-throttle-duration 3000
event client-anomaly wellenreiter filter-ageout 99
event excessive 80211-replay-check-failure threshold-client 8 threshold-radio 99
filter-ageout 9
ap-detection-ageout 50
ap-detection-wait-time 15
rfs7000-37FABE(config-wips-policy-test)#no history-throttle-duration
rfs7000-37FABE(config-wips-policy-test)#no event excessive 80211-replay-check-
failure threshold-client 8 threshold-radio 99 filter-ageout 9
rfs7000-37FABE(config-wips-policy-test)#show context
wips-policy test
event client-anomaly wellenreiter filter-ageout 99
no event excessive 80211-replay-check-failure threshold-client 8 threshold-radio 99
filter-ageout 9
ap-detection-ageout 50
ap-detection-wait-time 15
Related Commands
ap-detection Enables the detection of unauthorized or unsactioned access points
enable Enables a WIPS policy for use with a wireless controller profile
event Configures events, filters, and threshold values for a WIPS policy
history-throttle-duration Configures the duration for which event duplicates are omitted from the event history
signature Configures a WIPS policy signature
use Enables the categorization of devices on this WIPS policy