Specifications

21 - 14 WiNG 5.2.6 Wireless Controller CLI Reference Guide
21.1.6.1 signature
 config signature command
Configures a WIPS policy signature. For more information, see signature mode commands.
Supported in the following platforms:
• Access Points — AP300, AP621, AP622, AP650, AP6511, AP6521, AP6532, AP71XX, AP81XX
• Wireless Controllers — RFS4000, RFS6000, RFS7000, NX9000, NX9500
Syntax
signature <SIGNATURE-NAME>
Parameters
• signature <SIGNATURE-NAME>
Examples
rfs7000-37FABE(config-wips-policy-test)#signature test
rfs7000-37FABE(config-test-signature-test)#
rfs7000-37FABE(config-test-signature-test)#show context
signature test
rfs7000-37FABE(config-test-signature-test)#
Related Commands
signature
<SIGNATURE-NAME>
Configures a WIPS policy signature
• <SIGNATURE-NAME> – Enter a name for the WIPS policy signature. Provide a
unique name for the signature, which will distinguish it from other signatures with
similar configurations. The name should not exceed 64 characters.
no Deletes a WIPS policy signature