Wireless Broadband Routers User Guide

Section 2 Installation
2-10 WR850
3 Your PC’s wireless adapter may need to be configured to work with the WR850.
By default, the WR850 has a LAN IP Address of 192.168.10.1, and dynamically assigns
an IP Address to connected devices. The PC will not communicate properly with the
WR850 if the wireless adapter is not configured either:
(a) to accept a dynamic IP Address, or
(b) with a compatible static IP Address (i.e., 192.168.10.x, where x is a number
between 2 and 254).
To make any necessary adjustments to your PC’s wireless adapter, you can follow the
instructions in this section under Configuring Computers to Communicate with the
WR850.
4 To connect the PC to the WR850 through a wireless connection, use your PC’s wireless
adapter utility to verify:
(a) the selection of the SSID (Service Set Identifier) of the WR850, which by default
is set to motorolaABCDEF012345, where the final 12 characters represent the
WR850’s Wireless MAC address (see the image below to identify the WR850
Wireless MAC address from the product label),
(b) that authentication is set to Open, since the WR850 by default has no wireless
authentication enabled, and
(c) that no encryption is enabled, since the WR850 by default has no wireless
encryption enabled.
FOR HOME OR OFFICE USE
Te s t e d To Com p l y
With FCC St andards
MODEL : WR 85 0G
INPUT VOLTAGE: +5VDC, 2A
FCC ID: F2NWR850G
MOD EL WR85 0G
PART NUMBER: AAAAAA-BBB-CC
S/N: PPPPMMYJJJSSSSSCAABBCCCC
WIRE LESS MAC: AB CD EF 01 23 45
WAN MAC: AB CD EF 01 23 45
MADE IN TAIWAN
INPUT VOLTAGE: +5VDC, 2A
FCC ID : F2 NWR850 G
FOR HOME OR OFFICE USE
Te st ed To Com pl y
With FCC Standards
MODEL: WR850G
WIRELESS MAC: AB CD EF 01 23 45
WAN MAC: AB CD EF 01 23 45
MADE IN TAIWAN
MODEL W R850G
PART NUMBER: AAAAAA-BBB-CC
S/N: PPPPMMYJJJSSSSSCAABBCCCC
Wireless MAC address
Refer to your wireless adapter’s documentation for instructions on how to review and
adjust these settings.
NOTE: You can make wireless connections between the WR850 and other devices by
repeating Steps 3 and 4 with each of those devices, but it is recommended to wait
until after securing your wireless network to do so.