Wearable Terminal User Guide

Getting Started 1 - 5
Getting Started
In order to start using the wearable terminal for the first time:
• Install the main battery
• Charge the main battery and backup battery
• Install the wearable terminal onto the wrist mount
• Install an optional scanner
• Start the wearable terminal.
Installing and Removing the Main Battery
Installing the Main Battery
Before using the wearable terminal, install a lithium-ion (Li-ion) battery by placing the battery into the wearable
terminal as shown in Figure 1-4.
When a battery is installed in a wearable terminal for the first time the wearable terminal boots and powers on
automatically.
Figure 1-4 Installing the Main Battery
NOTE The main battery can be charged before or after installation into the wearable terminal. Use the
Single Slot USB cradle or Four Slot Spare Battery Charger to charge the main battery before
installation, or the Single Slot USB cradle or Four Slot Ethernet cradle to charge the main battery
after installation.
NOTE Ensure the battery is fully inserted. An audible click can be heard as the battery is fully inserted. A partially
inserted battery may result in unintentional data loss.