Wearable Terminal User Guide

1 - 10 WT4070/90 Wearable Terminal User Guide
Connecting a Scanner
The RS309 and RS409 scanners can be used with the wearable terminal. Refer to RS309 Scanner on page 3-9
and RS409 Scanner on page 3-7 for procedures for connecting the scanner to the wearable terminal.
Starting the Wearable Terminal
Press the Power button to turn on the wearable terminal. If the wearable terminal does not power on, perform a
cold boot. See Resetting the Wearable Terminal on page 2-14.
When the wearable terminal is powered on for the first time, it initializes its system. The Symbol splash screen
(Figure 1-10) appears for a short period of time followed by the Start Up window.
Figure 1-10 Symbol Splash Screen
Figure 1-11 Start Up Window
NOTE When a battery is fully inserted in a wearable terminal for the first time, upon the wearable terminal’s first
power up, the device cold boots and powers on automatically.
OEM VERSION 02.17.0001
OEM VERSION 03.17.0001
OEM VERSION 04.20.0004 or
05.30.0001