Wearable Terminal User Guide

3 - 4 WT4070/90 Wearable Terminal User Guide
Four Slot Ethernet Cradle
This section describes how to use a Four Slot Ethernet cradle (Figure 3-2) with the wearable terminal. For Ethernet
communication setup procedures refer to the WT4090 Integrator Guide.
Figure 3-2 Four Slot Ethernet Cradle
The Four Slot Ethernet cradle:
• Connects up to four wearable terminals to an Ethernet network.
• Provide 5.4 VDC power for operating the wearable terminal and charging the battery.
• Simultaneously charges up to four wearable terminals (with batteries installed).
You cannot ActiveSync using the Four Slot Ethernet cradle. To ActiveSync with a host computer use the Single Slot
USB cradle.
CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 4-2.
Scanner Well
CAUTION Use only a Symbol approved power supply output rated 12 VDC and minimum 9 A. Use of an alternative
power supply will void the product warranty and may cause product damage. See Appendix B, Regulatory
Information for the power supply regulatory compliance statement.