Wearable Terminal User Guide

4 - 4 WT4090 Wearable Terminal User Guide
Wearable terminal
turns itself off.
Wearable terminal
is inactive.
The wearable terminal turns off after a period of inactivity. If the
wearable terminal is running on battery power, this period can
be set to 30 sec., 1, 2, 3, 4, 5 or 6 minutes. If the
wearable
terminal
is running on external power, this period can be set to
1, 2, 3, 5, 10, 15 and 30 minutes.
Check the power settings by selecting
Start > Settings >
Control Panel > Power icon > Power Off tab.
Change the setting if you need a longer delay before the
automatic shutoff feature activates.
Battery is depleted. Replace the battery.
Battery is not
inserted properly.
Insert the battery properly (see
Installing and Removing the
Main Battery on page 1-5
).
The
wearable
terminal
’s battery is
low and it powers
down to protect
memory content.
Recharge the battery.
A message appears
stating that the
wearable terminal
memory is full.
Too many files
stored on the
wearable terminal .
Delete unused memos and records. You can save these
records on the host computer.
Too many
applications
installed on the
wearable terminal .
If you have installed additional applications on the
wearable
terminal
, remove them to recover memory.
Select
Start > Settings > Control Panel > Remove Programs
icon.
Select the unused program and select
Remove.
Table 4-1 Troubleshooting the Wearable Terminal (Continued)
Problem Cause Solution