User manual

DataSTORM

- 18 -

Copies/Output Page

You can select how many copies of a document you require by updating the field. Also you can select single sided,

duplex or reverse duplex. Click on Update to save the settings.

Input and Output Tray selection can also be selected from this page. Tray numbering can differ on different printers,

so some experimentation maybe required if using Tray numbers. On some printers Paper type selection for each

Tray can be set from the printer’s front panel. So if you setup an input tray from the printers front panel to be say

Letterhead you can tell DataSTORM to print to Tray Letterhead. Output Tray selection can be made from the drop

down menu.