Installation Instructions

Checking Saved Files
1) Touch icon at the top right of the main screen.
2) Touch ‘Storage location’ under Download on the Settings screen.
3) Select SD Card for ‘Storage location’.
4) Connect to Cloud & Dashcam and touch ‘Video list’.
5) Touch the icon of the video you want to download.
6) Once the download is complete, go to the storage location in the SD card and check the fi le.
, Note
You can change the video download storage space to SD card only for Android.
If you exit the app during download or go to another screen, the download stops.
- Downloading:
- Download complete:
Changing Dashcam Settings
1) Touch the Dashcam settings button on the Dashcam main screen.
2) On the Dashcam settings screen, change the settings.
3) Touch the Save button at the bottom of the Dashcam settings screen to save the changed settings.
(If you touch the Back button without pressing the Save button or exit the app, the changed settings will not be saved.)
4) If you change the UTC time and touch the Save button, a pop-up will appear saying “Dashcam will be rebooted, and
all videos saved in the Dashcam will be erased.”
If you want to proceed, touch the OK button to save.
After a moment, the Dashcam will reboot automatically and the UTC time will change.
, Note
Condition: The phone must be connected with the Dashcam with the AP or Station status.
Uploading to the File Server within Dashcam
1) Touch the ‘Video list’ button on the main screen and swipe left to the video you want to upload.
2) Upload the video by touching the Upload button that appears when you swipe.
3) Uploading is complete when the download icon disappears and the uploading process indicates 100%.
4) You can check the uploaded video by touching ‘Video list’ on the cloud main screen.
, Note
After logging onto the cloud with the account you subscribed to, you must be connected to the Dashcam with the Station
status.
Uploading may take quite a while depending on the Wi-Fi environment.
Uploading stops if you close the app or go to another screen while uploading the video.
Watching Live View (Cloud/Dashcam)
Touch the ‘Live stream’ button on the main screen to watch the video.
, Note
To watch on the cloud, you must log in with your subscription account and the Dashcam must be connected to the Wi-Fi.
If you see a pop-up saying that ‘there may be a limit to the streaming time’ while viewing on the cloud, touch the OK
button.
When watching on the Dashcam, you must be connected to the Dashcam with the AP or Station status.
You can watch a live video by touching the [
] icon on the upper right of the screen and switching the screen to
another direction.
You can watch or stop a live video in real time by touching the icon at the center of the screen.
Cautions
If impact is detected within 10 sec. after power is applied and event recording is conducted , or if
emergency recording is conducted by pressing emergency recording button, conduct recording
for 30 sec. from the point where CCTV recording has started.
If AP Mode is on during parking impact record, end recording and enter parking mode directly. In case of
Station Mode, wait for uploading for 5 min. after recording -> If AP connection is failed within 100 sec. after
recording, enter parking mode
Ignore impact when waiting for uploading after completing parking impact record.
Ignore impact when impact record or emergency record is being conducted when impact is detected.
End impact record and conduct emergency record if impact record is being conducted when emergency
record button is pressed.
Ignore emergency record if emergency record is being conducted when emergency record button is pressed.
During recording, end all fi le recordings if ACC is OFF (engine OFF).
During parking event record, end parking event record and reboot if ACC is ON (engine ON).
If ACC is on (engine on) during booting due to the impact from parking, conduct normal recording without
rebooting.
If the power is off during recording, all recording fi les should record until that time.
If the reset button is pressed during recording, all recorded fi les are broken since the process is not properly
ended.
If the SD card is removed during recording, all recorded fi les are broken since the fi le cannot be saved in the
SD card.
All recordings are stopped when entering the setting screen or fi le list screen in the app during recording.
→ Restart normal recording if it gets off the screen / No restart in case of emergency record or impact
record
The mobile phone used as the AP cannot be connected Directly to the Dashcam.
The Wi-Fi bandwidth only supports 2.4G Hz.
Priority by Mode
NO. Driving Mode Parking Mode Remarks
1 Emergency Record Parking Event
2 Event Record -
0 CCTV Record - No priority impact
FCC
FCC Part 15.19 Statements:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
FCC Part 15.21 statement:
Any changes or modifi cations not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
Confi guring Dashcam Network (Android/iOS)
■
Android/iOS
1) Touch the Dashcam settings button on the main screen.
2) Touch Wi-Fi under Device Network.
3) Enter the Wi-Fi name and Wi-Fi password to connect to the Dashcam and touch the SAVE button.
4) Touch the Save button at the bottommost part of the Dashcam settings screen to save the settings.
5) If you change the Dashcam status to Station, a pop-up appears saying that you need to confi gure Wi-Fi
settings. Then, touch the OK button.
6) If the above pop-up appears because the Dashcam is disconnected, touch the Wi-Fi Settings button.
7) Connect to the same Wi-Fi that you saved to connect with the Dashcam in the mobile phone Wi-Fi settings
window.
8) Run the app and touch the ‘Connect directly to the dashcam’ button.
9) Enter the password for the Dashcam and touch the OK button.
10) When the Dashcam is connected, ‘Linked to NISSAN00XXXXXXXX.’ notifi cation appears at the bottom.
, Note
Condition: The Dashcam must be connected through an AP.
When the Dashcam is successfully connected to the saved Wi-Fi, the Dashcam status changes to Station.
(Blue light-> Sky blue light)
5 6 7 8