User's Manual

Using the route menu (NNG)

Planning a multipoint route

To build your route destination-by-destination, perform the following steps:

1. Press [ ] on the navigation view to access the navigation menu.

2. Press [Multipoint Route].

There is only one line in the list of route points, the starting point of the route, which

is normally the current GPS position.

3. Press [Destination +] to select the destination. The [New Route to...] screen appears,

where you can select the destination of the route the same way as described in the

previous sections.

4. When the selected location appears on the map, press [Select as Destination] and the

list returns. If needed, you can add further intermediate destinations.

5. To add more route points, press [Insert Waypoint] or Press [Final Destinatin] to change

the final destination. The Add to Route... menu appears again, where you can select

the new route point the same way as you have set the destination before.

Note

↟ Press [ ] to optimise the whole route or the order of waypoints. You can also delete

all the destinations.

6. When you have added all the route points, Press [Calculate Route] and the planned

route is automatically calculated.