Instructions

9085_5010_04a_oi_e.docx / Feb-21 page 29 / 72
Continuation „Mode Frequency“:
SAMPLING TIME 2 (S)
The set value corresponds to the minimum measuring time (for channel B) in seconds.
The sampling time serves as a filter at irregular frequencies.
This parameter directly influences the reaction time of the device
0,001
Shortest Sampling time
0,1
Default value
9,999
Longest Sampling time
WAIT TIME 2 (S)
This parameter defines the period time of the lowest frequency, accordingly the time between two rising
signal edges on channel B detecting frequency 0 Hz. Frequencies with a period time higher than the set
“WAIT TIME 2” will be detected as frequency = 0 Hz.
0,01
Frequency = 0 Hz, for frequencies below 100 Hz
1,00
Default value
79,99
Frequency = 0 Hz, for frequencies below 0,01 Hz