Instructions
Table Of Contents
- 1. Safety Instructions and Responsibility
- 2. Compatibility Hint
- 3. Introduction
- 4. Electrical Connections
- 5. Parameter / Overview-Menu Structure
- 5.1. General Menu
- 5.2. Mode Frequency
- 5.3. Mode Counter
- 5.4. Mode SSI
- 5.5. Mode Start/Stop
- 5.6. Preselection Values
- 5.7. Preselection 1 Menu
- 5.8. Preselection 2 Menu
- 5.9. Preselection 3 Menu
- 5.10. Preselection 4 Menu
- 5.11. Preselection 5 Menu
- 5.12. Preselection 6 Menu
- 5.13. Serial Menu
- 5.14. Analog Menu
- 5.15. Command Menu
- 5.16. Linearization Menu
- 6. Appendix
9085_5010_04a_oi_e.docx / Feb-21 page 39 / 72
Continuation „Preselection 1 Menu“:
START UP DELAY 1 (S)
Start-up suppression for the switching condition of preselection 1. Time to start the monitoring function.
This adjustment is only valid for the switching condition |RESULT|<=|PRES| or RESULT<=PRES and only for
MODE „FREQUENCY“ – Channel A or MODE: „START/STOP“ + OPERATIONAL MODE: „SPEED“.
START UP DELAY is set to this parameter, when the frequency is detected as 0 Hz (or at a velocity of 0 m/s).
The monitoring function remains deactivated until the set time has elapsed.
With a setting "60.000", the automatic start override is activated. The monitoring function remains
deactivated until the preset value / switching point is exceeded for the first time.
0.000
No start-up suppression
…
59.999
Start-up suppression in seconds
60.000
Automatic start-up suppression