Instructions
Table Of Contents
- 1. Safety Instructions and Responsibility
- 2. Compatibility Hint
- 3. Introduction
- 4. Electrical Connections
- 5. Parameter / Overview-Menu Structure
- 5.1. General Menu
- 5.2. Mode Frequency
- 5.3. Mode Counter
- 5.4. Mode SSI
- 5.5. Mode Start/Stop
- 5.6. Preselection Values
- 5.7. Preselection 1 Menu
- 5.8. Preselection 2 Menu
- 5.9. Preselection 3 Menu
- 5.10. Preselection 4 Menu
- 5.11. Preselection 5 Menu
- 5.12. Preselection 6 Menu
- 5.13. Serial Menu
- 5.14. Analog Menu
- 5.15. Command Menu
- 5.16. Linearization Menu
- 6. Appendix
9085_5010_04a_oi_e.docx / Feb-21 page 56 / 72
Continuation “Read Coils and Write Single Coil”
12
66
SERIAL PRINT (do not use
with Modbus)
Sending of serial data, see parameter SERIAL VALUE
13
67
ACTIVATE DATA (not
required with Modbus)
The data is activated.
14
68
STORE DATA
Store to EEPROM
15
69
TESTPROGRAM (do not use
with Modbus)
Testprogram (do not use with Modbus)
Diagnose
The device supports the diagnostics subfunction 00 “Return Query Data”. Other diagnostics
functions are not available.