Instructions

9085_5010_04a_oi_e.docx / Feb-21 page 72 / 72
Technical Specifications:
Technical Specifications
Connections:
Connector type:
screw terminal, 1.5 mm² / AWG 16
Power supply (DC)::
Input voltage:
Protection circuit:
Consumption:
Fuse protection:
18 … 30 VDC
reverse polarity protection
approx. 50 mA (unloaded)
extern: T 0.5 A
Encoder supply:
Output voltage:
Output current:
5 VDC and 24 VDC (approx.1 V lower than the power supply)
max. 250 mA
Incremental-inputs:
Number of inputs:
Configuration::
RS422:
HTL differential
TTL/ HTL PNP / NPN:
Load:
Frequency measurement accuracy:
A, /A, B, /B
RS422, TTL, HTL differential, HTL PNP or HTL NPN
max. 1 MHz (RS422 differential signal > 0,5 V)
max. 500 kHz (HTL differential signal > 2 V)
max. 250 kHz
max. 6 mA / Ri > 5 kOhm / 10 pFv
+/- 50 ppm, +/-1 Digit
SSI interface:
Number (channels):
Configuration:
Format:
Frequency:
Resolution:
Load:
Clock, /Clock, Data, /Data
Master or Slave
Binary or Gray code
max. 1 MHz
10 … 32 Bit
Max. 3 mA / Ri > 10 kOhm / 10 pF
Start/Stop-interface:
RS422 input:
RS422 output:
Pulse width Init-pulse:
Frequency Init-pulse:
Clock frequency time
measurement::
Resolution:
1 x (Start_Stop, /Start_Stop); 1x (ext. Init_In, ext. /Init_In)
1 x (Init_Out, /Init_Out)
1…9 µs (adjustable)
62,5 Hz - 5000 Hz (adjustable)
48 MHz
Depending on the waveguide velocity of the encoder.
(e.g. 0,059mm / step at v = 2850 m/s)
Control inputs:
Number of inputs:
Format:
Frequency:
Load:
6
HTL, PNP (10 … 30 V)
max. 10 kHz
max. 2 mA / Ri > 15 kOhm / 470 pF
Analog-output:
Configuration:
Voltage output:
Current output:
Resolution:
Accuracy:
Reaction time:
current or voltage operation
-10…+10 V (max. 2mA)
0/4 … 20 mA (burden: max. 270 Ohm)
16 Bit
± 0,1 % 0°C … +45°C
± 0,15 % -20°C … 0°C und +45°C … +60°C
< 1 ms
Control-Outputs:
Number of outputs:
Format / level:
Output current:
Reaction time:
6
5 … 30 V (depends on the Com+ voltage), PNP
max. 200 mA
< 1 ms
Serial interface:
Format:
Baudrate:
RS232 oder RS485
9600, 19200 oder 38400 baud
USB interface:
Mini-USB:
115200 Baud, Data Format 8 none 1
Display:
LED:
green status LED
Housing:
Material:
Mounting:
Dimensions (w x h x d):
Protection class:
Weight:
Plastic housing
35 mm DIN rail (EN 60715)
23 x 102 x 102 mm
IP20
approx. 100 g
Ambient temperature:
Operation:
Storage:
-20°C … +60°C (not condensing
-25°C … +75°C (not condensing)
Failure rate:
MTBF in years:
59,1 a (Continuous operation at 60 ° C)
Conformity and standards:
EMC 2014/30/EU:
RoHS (II) 2011/65/EU
RoHS (III) 2015/863:
EN 61326-1: 2013 for industrial location
EN 55011: 2017 / CISPR11: 2017 Class A
EN IEC 63000: 2018