Instructions

8386.5010_01c_oi_e.doc / Feb-21 Page 11 / 11
6. Technical Specifications
Power supply:
Input voltage:
Protective circuit:
Consumption:
Connections:
17 … 30 VDC (Ripple ≤ 10 % at 24 VDC)
polarity protection
ca. 70 mA (unloaded)
screw terminal, 1.5 mm² / AWG 16
Encoder supply:
Output voltage:
Output current:
Connections:
5.2 VDC (internally generated) or
5 … 30 VDC (external connection)
max. 150 mA
SUB-D connector (male), 9-pin
SinCos inputs:
Amplitude:
Offset:
Channels:
Frequency:
Terminating resistors:
Connections:
0.8 … 1.2 Vpp
2 … 3 VDC
SIN+, SIN-, COS+, COS-, REF+, REF-
max. 500 kHz
120 Ohm (integrated)
SUB-D connector (male), 9-pin
SinCos outputs:
Number of outputs:
Amplitude:
Offset:
Channels:
Terminating resistors:
Connections:
2
0.8 … 1.2 Vpp
ca. 2.5 VDC
SIN+, SIN-, COS+, COS-, REF+, REF-
120 Ohm (must be equipped with the target device)
SUB-D connector (female), 9-pin
Incremental outputs:
Number of outputs::
Signal levels:
Channels:
Output current:
Output logic:
Signal running time:
Protection:
Connections:
2
RS422 / TTL or HTL (max. 30 V)
A, /A, B, /B, Z, /Z
max. 30 mA (per channel)
push-pull
ca. 200 ns
short circuit proof
screw terminal, 1.5 mm² / AWG 16
Housing:
Material:
Mounting:
Dimensions (w x h x d):
Protection class:
Weight:
plastic
35 mm top hat rail (according to EN 60715)
22.5 x 102 x 102 mm / 0.886 x 4.016 x 4.016 inch
IP20
ca. 100 g
Ambient temperature:
Operation:
Storage:
0 °C … +45 °C / +32 … +113 °F (not condensing)
-25 °C … +70 °C / -13 … +158 °F (not condensing)
Failure rate:
MTBF in years:
70.5 a (long-term usage at 60 °C / 140 °F )
Conformity & standards:
EMC 2014/30/EC:
Guideline 2011/65/EU:
EN 61000-6-2, EN 61000-6-3, EN 61000-3-4, EN 61326-1
RoHS-conform