User manual

AX34509b_e.doc / Feb-13 Page 18 / 38
6.3. Modes of operation
6.3.1. Single mode (input A only)
Menu Text
Setting Range
De
fault
Input A range
Set the desired range for input A
Voltage +/-10V
Current 0-20 mA
Current 4-20 mA
Start value A
Value which the unit will display with a
zero input signal of 0 volts or 0/4 mA
-99999 … 99999 0
End value A
Value which the unit will display with a
full scale input of 10 volts or 20 mA
-99999 … 99999 1000
Decimal point for signal A
Select the desired position of the decimal point
00000.0
000000 No decimal point
00000.0 one decimal position
---->
0.00000 five decimal positions
Average filter input A
Adjustable floating average filter for smoothing
the display with unsteady input signals
No filtering
2,4,8,16
Number of floating averaging
cycles
Offset value for input A *)
Offset value for the zero displacement of input
A signals
-99999 … 99999 0
*) When the Tare function is switched on only