User manual

Dx34510b_oi_e.doc / Jun-15 Page 11 / 42
3. How to Operate the Front Keys
For setup and other operations the unit uses three front keys which subsequently will be
denominated as follows:


ENTER
(Input)
SET
(Setting)
Cmd
(Command)
The functions of the keys are depending on the actual operating state of the unit.
The following three operating states apply:
 Normal display state
 Setup state
a.) Basic setup
b.) Operational parameter setup
 Teach operation
3.1. Normal Display State
You can only change over to other operation states while the unit is in display state.
Change over to
Key operation
Basic setup
Keep ENTER and SET down simultaneously for 3 seconds
Operational
parameter setup
Keep ENTER down for 3 seconds.
Teach operation
Keep Cmd down for 3 seconds
The Cmd key is only used to execute the Teach procedure with linearization. For more details
please refer to sections 5.1 and 5.2.