Instructions

Dx350_05a_oi_e.doc / Mai-18 Seite 50 / 51
6.5 Technical specifications
Technical Specifications:
Connections:
Connector type:
screw terminal, 1.5 mm² / AWG 16
Power supply (DC):
Input voltage:
Protection circuit:
Consumption:
Fuse protection:
18 … 30 VDC
reverse polarity protection
approx. 100 mA (unloaded)
extern: T 0.5 A
Power supply (AC):
(Option AC)
Input voltage:
Power consumption:
Fuse protection:
115 … 230 VAC (50 … 60 Hz)
approx. 3 VA (unloaded)
extern: T 0.1 A
Encoder supply:
DC version:
AC version:
24 VDC (approx. 1 V lower than the power
supply voltage), max. 250 mA
24 VDC (± 15%), (max. 150 mA until 45°C / 80 mA by
more than 45°C)
Encoder supply:
(DX355)
DC version:
AC version
24 VDC (approx. 1 V lower than the power supply
voltage), max. 250 mA or 5 VDC (± 15%), max. 250 mA
24 VDC (± 15%) (max. 150 mA until 45°C / 80 mA by
more than 45°C) or 5 VDC (± 15%), max. 250 mA)
Incremental inputs:
Number of inputs:
Configuration:
Format:
Frequency:
Load:
2 (A, B)
PNP, NPN, Namur or Tri-State
HTL (Low 0 … 3 V, High 9 … 30 V)
max. 250 kHz
max. 6 mA / Ri > 5 kOhm / 470 pF
Incremental inputs:
(DX355)
Number of inputs:
Configuration::
RS422:
HTL differential
HTL PNP / NPN:
Load:
4 (A, /A, B, /B)
RS422, HTL differential, HTL PNP or HTL NPN
max. 1 MHz (RS422 differential signal > 0,5 V)
max. 500 kHz (HTL differential signal > 2 V)
max. 250 kHz (Low 0 … 3 V, High 9 … 30 V)
max. 3 mA / Ri > 10 kOhm / 47 pF
Control inputs:
Number of inputs:
Format:
Frequency:
Load:
3
HTL, PNP (Low 0 … 3 V, High 9 … 30 V)
max. 10 kHz
max. 2 mA / Ri > 15 kOhm / 470 pF
Analog output:
(Option AO/AR)
Configuration:
Voltage output:
Current output:
Resolution:
Accuracy:
Reaction time:
current or voltage operation
-10…+10 V (max. 2 mA)
0/4 … 20 mA (burden: max. 270 Ohm)
16 Bit
± 0,1 %
< 150 ms
Control outputs:
(Option AO/AR/CO/CR)
Number of outputs:
Format / level:
Output current:
Reaction time:
4
5 … 30 V (depend on COM+ voltage), PNPc
max. 200 mA
< 1 ms